Consumer Insights
Uncover trends and behaviors shaping consumer choices today
Procurement Insights
Optimize your sourcing strategy with key market data
Industry Stats
Stay ahead with the latest trends and market analysis.
The United States paid the most for calcined bauxite in Q3 2026: USD 610/MT, up 0.7% from USD 606/MT in Q2. Import costs and freight from Asia and South America, together with steady demand from refractory and abrasive makers, keep American prices above the other three markets. Worldwide, the average rose 1.2% to USD 514/MT from USD 508/MT, mostly because tight supply of raw bauxite and higher energy costs lifted prices in China and India. What about Q4 2026? We expect a global average somewhere in the USD 500-540/MT range, with raw bauxite supply, energy costs, freight rates and demand from steel and refractory producers doing most of the work.
Calcined bauxite is bauxite heated in a kiln to remove moisture and create a hard, stable aluminum oxide material, and it is sold in refractory, abrasive and proppant grades with different alumina contents. It is used in refractory bricks and castables for steel and cement plants, in abrasives, in ceramic proppants for oil wells and in some construction products. Prices reflect the quality of the raw bauxite, the alumina content, energy costs for calcining, freight and demand from steel makers.
China is the largest producer and consumer of calcined bauxite, and Guyana, India and other regions supply export markets with high alumina grades. Refractory makers in the United States and Europe depend on imports, so freight and supply from Asia and South America affect prices. Prices are quoted per metric ton, and they differ by alumina content, size and packing.
Prices should rise slightly through the rest of 2026. Supply of high quality raw bauxite remains tight, energy costs are firm, and demand from steel plants is steady. Weaker steel output in some regions limits the size of the rise. Year on year, the global average has moved from USD 496/MT to USD 514/MT, an increase of 3.6%.
For Q4, risks to the price are evenly spread. What could push prices higher? Tighter bauxite supply, higher energy costs or stronger steel output would lift prices. What could pull them lower? Weaker steel output, lower freight rates or new calcining capacity would lower prices.
| Region | 2026 Price Range (USD/MT) | Outlook |
| Global Average | 500 - 540 | Tight bauxite supply supports a slight rise |
| China | 505 - 550 | Raw bauxite costs support prices |
| Guyana | 435 - 470 | Low cost ore keeps prices lowest |
| India | 470 - 505 | Steel demand supports prices |
| United States | 595 - 645 | Import costs keep prices highest |
China recorded a 1.6% gain in Q3 2026, with the average reaching USD 520/MT against USD 512/MT in Q2. Chinese prices rose as the supply of raw bauxite tightened because of environmental inspections. The Q3 2025 average of USD 495/MT puts the current price 5.1% above its level a year earlier. The gap to the four-market average of USD 514/MT was 1.2% above for China.
Why did the price of Calcined Bauxite change in Q3 2026 in China?
China rose. Supply of raw bauxite tightened because of environmental inspections, energy costs for calcining increased, and refractory makers booked more material. At USD 520/MT, China is 3.8% higher than in Q4 2025, when the average was USD 501/MT, and the global average is 2.6% higher over the same period. On the global measure the average was 1.2% higher over the quarter.
The Q3 2026 average for Guyana stood at USD 445/MT, an increase of 0.9% on the USD 441/MT recorded in Q2. Guyanese prices edged up as the demand from abrasive and proppant buyers improved. Year on year, the average is 2.8% higher, against USD 433/MT in Q3 2025. Relative to the four-market average of USD 514/MT, Guyana traded 13.4% below in Q3 2026.
Why did the price of Calcined Bauxite change in Q3 2026 in Guyana?
Guyana edged higher. Demand from abrasive and proppant buyers improved, freight rates increased, and producers raised offers. This leaves Guyana 2.1% higher than at the end of 2025, when the average was USD 436/MT, while the global average is 2.6% higher over the same period. For comparison, the global average moved 1.2% higher over the same quarter.
India registered a 1.1% increase in Q3 2026, taking the average to USD 480/MT from USD 475/MT in Q2. Indian prices edged up as the demand from steel plants for refractories improved. The current level is 3.9% above the Q3 2025 average of USD 462/MT. This places India 6.6% below the four-market average of USD 514/MT for Q3 2026.
Why did the price of Calcined Bauxite change in Q3 2026 in India?
India edged higher. Demand from steel plants for refractories improved, costs for coal and power increased, and producers raised offers. From USD 467/MT at the close of 2025 to USD 480/MT in Q3 2026, the price in India has risen 2.8%, and the global average has risen 2.6%. The global average shifted 1.2% higher in the same quarter.
The United States gained 0.7% to USD 610/MT in Q3 2026, from USD 606/MT in Q2. American prices edged up as the demand from refractory and abrasive makers stayed steady. A year earlier, in Q3 2025, the average stood at USD 595/MT, which makes the current price 2.5% higher. Against the four-market average of USD 514/MT, the United States stood 18.7% above in the quarter.
Why did the price of Calcined Bauxite change in Q3 2026 in United States?
The United States edged higher. Demand from refractory and abrasive makers stayed steady, import costs increased, and distributors raised prices. Across the first three quarters of 2026, the United States has moved up 1.8% from USD 599/MT in Q4 2025 to USD 610/MT, against a 2.6% gain for the global average. Across the four markets the average was 1.2% higher on the quarter.
China gained 1.2% to USD 512/MT in Q2 2026, from USD 506/MT in Q1. Chinese prices rose as the costs for raw bauxite rose. Compared with Q2 2025, when China averaged USD 485/MT, the current price is 5.6% higher. In comparison with the average of USD 508/MT across the four markets, the price in China was 0.8% higher.
Why did the price of Calcined Bauxite change in Q2 2026 in China?
China rose. Costs for raw bauxite rose, demand from refractory makers improved, and producers raised offers. This came on top of a 1.0% gain in Q1, and the average ended 5.6% above its level of a year earlier, when it stood at USD 485/MT. Q3 added to the change, with the price at USD 520/MT.
In Q2 2026, the average price in Guyana rose 0.7% to USD 441/MT, compared with USD 438/MT in Q1. Guyanese prices rose as the demand from refractory buyers improved. Measured against Q2 2025, when the average stood at USD 428/MT, the market is 3.0% higher. Guyana ended the quarter 13.2% below the group average of USD 508/MT.
Why did the price of Calcined Bauxite change in Q2 2026 in Guyana?
Guyana rose. Demand from refractory buyers improved, freight costs increased, and producers raised offers. Q1 had brought a 0.5% gain, and by the end of Q2 the price was 3.0% above the Q2 2025 average of USD 428/MT. The move then extended in Q3, taking the price to USD 445/MT. On the global measure the average was 0.8% higher over the quarter.
India's average moved up 0.8% in Q2 2026, to USD 475/MT from USD 471/MT in Q1. Indian prices rose as the demand from steel plants improved. In Q2 2025 the average was USD 455/MT, so the market is 4.4% higher on a yearly basis. The price in India was 6.5% below the group average of USD 508/MT in Q2 2026.
Why did the price of Calcined Bauxite change in Q2 2026 in India?
India rose. Demand from steel plants improved, energy costs increased, and producers raised offers. Coming after a 0.9% gain in Q1, the Q2 figure sits 4.4% above the USD 455/MT of Q2 2025. The same direction continued in Q3, with the price reaching USD 480/MT. For comparison, the global average moved 0.8% higher over the same quarter.
Prices in the United States firmed 0.7% in Q2 2026 to USD 606/MT, compared with USD 602/MT in Q1. American prices rose as the demand from refractory makers improved. This represents a 3.1% increase on the USD 588/MT recorded in Q2 2025. The gap to the four-market average of USD 508/MT was 19.3% above for the United States.
Why did the price of Calcined Bauxite change in Q2 2026 in United States?
The United States rose. Demand from refractory makers improved, import costs increased, and distributors raised prices. The 0.5% gain in Q1 set the base, and Q2 finished 3.1% above the USD 588/MT recorded a year earlier. Q3 added to the change, with the price at USD 610/MT. The global average shifted 0.8% higher in the same quarter.
Calcined Bauxite prices rose through 2025 and the first half of 2026 and rose again in the third quarter in all four markets. The global average moved from USD 483/MT in Q1 2025 to 489 in Q2, 496 in Q3 and 501 in Q4, then 504 in Q1 2026, 508 in Q2 and 514 in Q3, a net gain of roughly 6.4% across the window. Tight supply of raw bauxite, higher energy costs and steady demand from refractory makers lifted prices for six quarters.
| Quarter | Price (USD/MT) | QoQ Change | Direction |
| Q3 2026 | 514 | +1.2% | ↑ Rising |
| Q2 2026 | 508 | +0.8% | ↑ Rising |
| Q1 2026 | 504 | +0.6% | ↑ Rising |
| Q4 2025 | 501 | +1.0% | ↑ Rising |
| Q3 2025 | 496 | - | - Stable |
| Q4 2026 | In Progress | - | - In Progress |
2025 was a year of gradual increases for calcined bauxite, with prices rising in each quarter in all four markets. Starting near USD 483/MT in Q1, the global average finished the year at 501 in Q4, a gain of about 3.7%. Higher energy and freight costs and steady demand from steel and refractory producers supported producers throughout the year.
In China, prices moved from about USD 477/MT in Q1 2025 to USD 501/MT by Q4, up roughly 5.0%. Chinese prices rose gradually as the raw bauxite and energy costs increased. Relative to the end of 2025, the price in China is 3.8% higher at USD 520/MT. The quarterly breakdown above allows each stage of that path to be traced.
In Guyana, prices moved from about USD 423/MT in Q1 2025 to USD 436/MT by Q4, up roughly 3.1%. Guyanese prices rose gradually as the freight costs and export demand increased. By Q3 2026 the average for Guyana had reached USD 445/MT, 2.1% above the Q4 2025 close. The same regional pattern is carried into the quarterly analysis above, where the quarter-by-quarter figures can be traced.
In India, prices moved from about USD 449/MT in Q1 2025 to USD 467/MT by Q4, up roughly 4.0%. Indian prices rose gradually as the energy costs and demand from steel plants increased. The latest quarter places India at USD 480/MT, which is 2.8% above the level at which 2025 ended. The quarterly sections above show how the annual average developed over the year.
In the United States, prices moved from about USD 582/MT in Q1 2025 to USD 599/MT by Q4, up roughly 2.9%. American prices rose gradually as import costs and freight costs increased. Since the 2025 close of USD 599/MT, the price in the United States has moved up 1.8%, reaching USD 610/MT in Q3 2026.
Expert Market Research: Your Source for Real-Time Calcined Bauxite Price Intelligence
We keep a continuous eye on calcined bauxite prices wherever it is produced or consumed at scale, tracing causation through raw bauxite supply, alumina content, energy costs, freight rates and demand from steel, refractory and abrasive producers. Our forecasts draw on production data, trade flows, input cost trends and demand indicators across all reporting regions, so subscribers see why a price moved and not just that it did. Need pricing data, bespoke market analysis, or procurement advisory? Reach out to our team.
*While we strive to always give you current and accurate information, the numbers depicted on the website are indicative and may differ from the actual numbers in the main report. At Expert Market Research, we aim to bring you the latest insights and trends in the market. Using our analyses and forecasts, stakeholders can understand the market dynamics, navigate challenges, and capitalize on opportunities to make data-driven strategic decisions.*
Refractory bricks and castables for steel and cement plants, abrasives and ceramic proppants.
In Q3 2026, it averaged USD 520/MT in China, USD 445/MT in Guyana, USD 480/MT in India, and USD 610/MT in the United States. The United States was the priciest market.
The global average went from USD 501/MT in Q4 2025 to 504 in Q1, 508 in Q2 and 514 in Q3, up 2.6% overall. Increases through 2025 and the first half of 2026 continued in all four markets in the third quarter.
Tight supply of raw bauxite and higher energy costs lifted prices.
We expect a global average somewhere in the USD 500-540/MT range. Tight bauxite supply supports a slight rise after the third quarter.
The United States sits at the top and Guyana at the bottom. The United States pays the most on import costs, while Guyana sits lowest on low cost ore.
Monthly. Need something more current? The Expert Market Research team is available directly.
Raw bauxite supply, energy costs, freight rates and steel demand drive the volatility.
China, Guyana, India and the United States lead production and trade of calcined bauxite.
Specify the alumina content, contract by half year and diversify between origins.
One Year Subscription
One Year Subscription
USD 799
USD 699
tax inclusive*
*Please note that the prices mentioned below are starting prices for each bundle type. Kindly contact our team for further details.*
Flash Bundle
Small Business Bundle
Growth Bundle
Enterprise Bundle
*Please note that the prices mentioned below are starting prices for each bundle type. Kindly contact our team for further details.*
Flash Bundle
Number of Reports: 3
20%
tax inclusive*
Small Business Bundle
Number of Reports: 5
25%
tax inclusive*
Growth Bundle
Number of Reports: 8
30%
tax inclusive*
Enterprise Bundle
Number of Reports: 10
35%
tax inclusive*
How To Order
Select License Type
Choose the right license for your needs and access rights.
Click on ‘Buy Now’
Add the report to your cart with one click and proceed to register.
Select Mode of Payment
Choose a payment option for a secure checkout. You will be redirected accordingly.
Strategic Solutions for Informed Decision-Making
Gain insights to stay ahead and seize opportunities.
Get insights & trends for a competitive edge.
Track prices with detailed trend reports.
Analyse trade data for supply chain insights.
Leverage cost reports for smart savings
Enhance supply chain with partnerships.
Connect For More Information
Our expert team of analysts will offer full support and resolve any queries regarding the report, before and after the purchase.
Our expert team of analysts will offer full support and resolve any queries regarding the report, before and after the purchase.
We employ meticulous research methods, blending advanced analytics and expert insights to deliver accurate, actionable industry intelligence, staying ahead of competitors.
Our skilled analysts offer unparalleled competitive advantage with detailed insights on current and emerging markets, ensuring your strategic edge.
We offer an in-depth yet simplified presentation of industry insights and analysis to meet your specific requirements effectively.